Chocolate Balloon Centerpiece
Serves: 5
Clarabelle Lynch
1 January 1970
Based on User reviews:
38
Spice
52
Sweetness
34
Sourness
44
mins
Prep time (avg)
3.7
Difficulty
Ingredients:
Directions:
1
Special equipment: balloons Please consider a few things before you begin this project
2
First, not every balloon works
3
They don't always release
4
If you can find the strong punching bag type balloon, choose that one
5
Some people are allergic to latex so be aware that most balloons are made from latex
6
Inflate the balloon
7
Secure it closed with a ribbon (you will need to untie this later)
8
Dip the bottom of the balloon in the dark chocolate
9
This will create a base
10
Set the wet chocolate onto a parchment paper-lined surface
11
Make sure it stands straight
12
Let the chocolate set until firm
13
Place dark chocolate in a cornet
14
The next step will be easier if you have an assistant
15
Have the assistant hold the balloon horizontally in front of you while you pipe chocolate lines from top to bottom all the way around the surface
16
When complete, drizzle more lines diagonally across the existing lines
17
Apply a bit more chocolate near the top opening and near the bottom to provide extra support
18
This will form a bird cage effect
19
Let the chocolate set
20
When the chocolate begins to harden, release a little bit of the air from the balloon, but just enough so the balloon retracts slightly (about 1/8-inch from the outside)
21
Carefully set the chocolate covered balloon aside
22
Depending on your room temperature, it will take a good 10 minutes to set
23
To make the balloon flowers, inflate 10 small balloons and close them with ribbons
24
Your presentation will be more interesting if you inflate them to different degrees to make different sized flowers
25
Dip each balloon anywhere from 1 to 3 times to create a different number of petals on each
26
To accomplish this, dip the balloon once, spin it slightly, dip it again, etc
27
Set each dipped balloon on a parchment-lined sheet pan and allow the chocolate to set
28
When set, pop the balloon and remove the deflated balloon from the flower
29
Use cocoa butter paints to decorate the insides of the flowers
30
Let the paint set
31
If you made different sizes, you can layer the balloon flowers by setting one inside another
32
Use chocolate to "glue" them together
33
Slowly deflate the large balloon that is inside the large chocolate cage by untying its ribbon
34
Carefully pull the deflated balloon through the hole at the top
35
Use tempered chocolate to "glue" the chocolate flowers onto the large cage
36
Reserve one to cover the hole at the top
37
Your guests will certainly be fascinated by your creation
38
From Dessert Circus, Extraordinary Desserts You Can Make at Home, by Jacques Torres How to Temper Chocolate: Chocolate is tempered so that after it has been melted, it retains its gloss and hardens again without becoming chalky and white (that happens when the molecules of fat separate and form on top of the chocolate)
39
There are a variety of ways to temper
40
One of the easiest ways to temper chocolate is to chop it into small pieces and then place it in the microwave for 30 seconds at a time on high power until most of the chocolate is melted
41
Be very careful not to overheat it
42
(The temperature of dark chocolate should be between 88 and 90 degrees F, slightly warmer than your bottom lip
43
It will retain its shape even when mostly melted
44
White and milk chocolates melt at a temperature approximately 2 degrees F less because of the amount of lactose they contain
45
) Any remaining lumps will melt in the chocolate's residual heat
46
Use an immersion blender or whisk to break up the lumps
47
Usually, chocolate begins to set, or crystallize, along the side of the bowl
48
As it sets, mix those crystals into the melted chocolate to temper it
49
A glass bowl retains heat well and keeps the chocolate tempered longer
50
Another way to temper chocolate is called seeding
51
In this method, add small pieces of unmelted chocolate to melted chocolate
52
The amount of unmelted chocolate to be added depends on the temperature of the melted chocolate, but is usually 1/4 of the total amount
53
It is easiest to use an immersion blender for this, or a whisk
54
The classic way to temper chocolate is called tabliering
55
Two thirds of the melted chocolate is poured onto a marble or another cold work surface
56
The chocolate is spread out and worked with a spatula until its temperature is approximately 81 degrees F
57
At this stage, it is thick and begins to set
58
This tempered chocolate is then added to the remaining non-tempered chocolate and mixed thoroughly until the mass has a completely uniform temperature
59
If the temperature is still too high, part of the chocolate is worked further on the cold surface until the correct temperature is reached
60
This is a lot of work, requires a lot of room, and makes a big mess
61
A simple method of checking tempering, is to apply a small quantity of chocolate to a piece of paper or to the point of a knife
62
If the chocolate has been correctly tempered, it will harden evenly and show a good gloss within a few minutes